Best Soundbar Under $100: 4 Bars Checked Against Maker Specs
Picking the best soundbar under $100 is mostly about which corner you’re willing to cut, because every name-brand bar at this price drops something.
One pick has no HDMI port at all, another takes only plain two-channel PCM over HDMI, and none of them ships with an HDMI cable, so a bar that suits one TV can sit silent on the next.
Choose the trade you can live with, and $100 still buys clearer voices, a fuller sound than most TV speakers, and Bluetooth for your phone.
Here are four bars from Philips, Sony and Vizio, each under $100 on Amazon on 20 October 2026 and described from its maker’s own documents.
The quick answer and a comparison table come first, then each pick, then the connection, subwoofer and dialogue questions that decide which one fits your TV.
What Is the Best Soundbar Under $100?
That corner-cutting decides the answer, and for most TVs the Philips TAB5109 is the best soundbar under $100. Philips’s spec sheet gives it HDMI ARC, optical, a 3.5 mm audio input, USB and Bluetooth 5.4, plus Dolby Digital Plus, DTS 5.1 and DTS Virtual:X over HDMI ARC (Philips).
If your TV has no HDMI ARC port, the Sony HT-S100F connects by optical with the cable in the box. If you want more bass without a second box on the floor, the Vizio SB362An-F6 builds two subwoofer drivers into the bar.
| Pick | Channels | Subwoofer | TV connections | Sound processing the maker lists | Best for |
|---|---|---|---|---|---|
| Philips TAB5109 | 2.0 | None | HDMI ARC, optical, 3.5 mm AUX | Dolby Digital Plus, DTS 5.1, DTS Virtual:X | Best overall |
| Sony HT-S100F | 2.0 | None | HDMI ARC, optical | S-Force Pro front surround | Older TVs |
| Vizio SB362An-F6 | 2.1 | Two built into the bar | Optical, 3.5 mm AUX, no HDMI | Dolby Audio over optical, DTS Virtual:X, DTS TruVolume | Bass without a separate box |
| Philips TAB4000 | 2.0 | None | HDMI ARC only | 2-channel PCM over HDMI ARC | One-cable HDMI setup |
Every pick was under $100 on Amazon when checked on 20 October 2026, with at least 4.0 stars from 50 or more reviews and stock on hand. Prices, ratings and review counts change daily, so they aren’t printed here; check the price before you buy, since a sale ending can push a bar past $100.
None of these bars was played or measured for this guide, so each description rests on its maker’s own spec sheet, manual or setup guide. If your ceiling can move a little, the best soundbars under $150 list adds wireless subwoofers and streaming.
| Product | Link |
|---|---|
Best Overall  | See ratings |
Best for Older TVs  | See ratings |
Best for Bass Without a Separate Box  | See ratings |
Best for a One-Cable HDMI Setup  | See ratings |
Which Soundbars Under $100 Made the List?
Those four picks split into three 2.0 bars and one 2.1 bar, and each one wins a different kind of TV setup. The TAB5109 has the most ways in, the Sony suits older TVs, the Vizio adds built-in bass drivers, and the TAB4000 keeps things to a single HDMI cable.
Philips TAB5109
For most TVs, the Philips TAB5109 is the pick.
the Philips TAB5109
Amazon lists it as the Philips B5109, and Philips’s US page names the same Soundbar 2.0 as the TAB5109/37, with two full-range drivers and 120 W max, or 60 W RMS. Over HDMI ARC it takes Dolby Digital, Dolby Digital Plus, 2-channel PCM and DTS 5.1, and it adds DTS Virtual:X for a virtual 3D effect.
No other pick here has as many ways in: HDMI ARC, optical, a 3.5 mm audio input, USB and Bluetooth 5.4 with LE Audio support. That makes it the safest choice when you don’t yet know which port your TV offers.
Philips’s leaflet lists four EQ modes (Movie, Music, Voice and Stadium) and a Dialogue Enhancement switch that works in any of them, plus a night mode and the Philips Home Entertainment app (Philips). It’s also Roku TV Ready, and the box holds wall-mount brackets and a remote.
The catch sits in the format list: its optical input takes only Dolby Digital and 2-channel PCM, so HDMI ARC is the better route when your TV has it. Philips gives the bar as 766 mm wide, about 30 inches.
Sony HT-S100F
For an older TV, the Sony HT-S100F is the pick.
the Sony HT-S100F
Sony’s startup guide connects it to a TV’s HDMI ARC jack with an HDMI cable you buy separately, or to the TV’s optical output with the optical cable Sony supplies (Sony, Abt’s copy). The box also holds a remote, two AAA batteries and a wall-mount template.
Sony’s Amazon listing describes a 2.0-channel bar with a bass reflex speaker for deeper audio, S-Force Pro front surround, and music playback over Bluetooth or USB. Lights for TV, Bluetooth and USB on the bar show which input is playing.
One catch from the guide: on a TV without an ARC jack, an HDMI cable alone gives no sound, so use optical there. That optical route, with the cable already in the box, is why it suits older sets.
Sony’s guide also warns that the bar can come on muted, depending on which you switch on first, and says to turn the TV on before the bar. It names no dialogue or voice mode, and the documents read for this guide give no width.
Vizio SB362An-F6
For bass without a second box, the Vizio SB362An-F6 is the pick.
the Vizio SB362An-F6
Vizio’s quick start guide gives this bar one 2.67-inch full-range driver for each channel and two built-in subwoofers, each with its own 3-inch driver, for a system response of 50 Hz to 20 kHz (Vizio). Vizio’s Amazon listing calls it a 36-inch 2.1 bar, and it’s the only pick here with dedicated bass drivers.
The inputs are the big difference: one optical, one 3.5 mm stereo jack, USB for WAV and MP3 files, and Bluetooth, with no HDMI port at all. Vizio’s guide rates the optical cable “better” and the analog cable “good,” and puts both in the box along with an RCA-to-3.5 mm cable and wall brackets.
Sound tools include two EQ presets (Music and Movie), separate bass and treble levels, DTS TruVolume, which Vizio says keeps a consistent, comfortable volume level, and DTS Virtual:X, which Vizio says simulates the effect of overhead sound. Dolby Audio decoding works only on the optical input.
Without HDMI, it can’t use your TV’s remote through HDMI-CEC, but Vizio’s guide shows how to teach it your TV remote’s volume and mute buttons by infrared. One oddity: the guide’s 2018 printing labels its package-contents page with another model number, SB3621n-E8M, so go by the specifications page.
Philips TAB4000
For a single-cable HDMI setup, the Philips TAB4000 is the pick.
the Philips TAB4000
Amazon lists it as the Philips B4000, and Philips’s leaflet for the TAB4000/37 describes an “enhanced stereo” 2.0 bar with two full-range drivers and 60 W max, or 30 W RMS (Philips). Its connections are one HDMI ARC port, USB playback and Bluetooth 5.4.
That short list is the trade: Philips names no optical or 3.5 mm input, so it needs a TV with HDMI ARC. Over that port it takes 2-channel LPCM only, so set your TV’s audio output to PCM if the bar stays silent.
You get four EQ presets (Music, Movie, Voice and Stadium) and treble and bass control, but Philips lists no night mode and no app control. HDMI-CEC covers one-touch play, system audio control and standby, and Roku TV Ready means one remote on a Roku TV.
The box holds a remote, a power adapter and a wall-mount bracket. Philips’s manual suggests mounting it about 50 mm, or 2 inches, below the bottom of a wall-hung TV.
Get Studio Tips Weekly
Join 5,000+ creators getting acoustic treatment advice every week.
No spam. Unsubscribe anytime.Why Are So Few Name-Brand Soundbars Under $100?
Four picks may look thin next to the long lists elsewhere, and the reason is the price line itself. RTINGS, which says it has tested over 250 soundbars, notes that there aren’t many models under $100 anymore, though some drop below that price on sale (RTINGS).
RTINGS adds that budget bars usually skip premium features and advanced connectivity, which matches the spec sheets here.
Amazon’s under-$100 results on 20 October 2026 bore that out. Most of the listings came from little-known brands, while familiar bars such as the Hisense HS2100 and A620, Roku Streambar SE and Amazon Fire TV Soundbar sat above $100 that day.
A pick here has to be checkable against its maker’s own spec sheet, manual or setup guide. Without that, a card would be repeating a listing’s claims, and listings for cheap bars often skip the ports and formats that decide whether a bar works with your TV.
Think of it like buying a phone charger: the cheapest one may work, but you want the plug and the wattage written down before you rely on it. The four bars here all have those details in writing from Philips, Sony or Vizio.
What Do You Give Up With a Soundbar Under $100?
That checkable list also shows what this price leaves out, and the makers’ own specs spell it out. None of the four lists Wi-Fi, an HDMI input for a console, HDMI eARC, Dolby Atmos decoding or height drivers, and only the Vizio has any dedicated bass drivers.
Here’s what each spec sheet gives instead, so you can match the trade to your TV:
- Channels: three 2.0 bars and one 2.1 bar, with no rear speakers anywhere.
- Formats: Dolby Digital Plus and DTS 5.1 on the TAB5109, Dolby Audio over optical on the Vizio, and plain PCM on the TAB4000.
- Ports: from five ways in on the TAB5109 to a single HDMI ARC port on the TAB4000.
- Cables: an optical cable with the Sony and Vizio, and no HDMI cable with any of them.
What you keep is the basic job of a soundbar: a separate cabinet with its own drivers, a remote, Bluetooth for your phone, and a wall mount. For a lot of bedrooms and small living rooms, that covers the reason you wanted one.
If you’re coming from TV speakers, the step up is real but limited. The bigger jumps, a separate subwoofer, surround speakers or Atmos, start above this price, and the Burton Acoustix budget soundbar guide walks through those tiers.
Can You Get a Soundbar With a Subwoofer Under $100?
That missing subwoofer is the first thing most people ask about at this price. Yes, but among the bars checked against their makers’ documents on 20 October 2026, only with the subwoofer built in: the Vizio SB362An-F6 has two 3-inch subwoofer drivers inside its cabinet, while the name-brand bars with a separate wireless subwoofer cost more than $100 on Amazon that day.
Dolby counts a subwoofer as the number after the dot, so 2.1 means two main speakers and one subwoofer (Dolby). Vizio’s listing calls its bar 2.1 even though both bass drivers sit in the same cabinet as the main speakers.
Amazon did show cheaper bars from lesser-known brands with wireless subwoofers, but their makers’ documents weren’t read, so they aren’t picks here.
A separate box has one advantage a built-in driver can’t match. Dolby notes that bass isn’t directional, so a subwoofer can go almost anywhere in the room, and you can try a few spots and keep the one that sounds best.
A built-in pair trades that freedom for one less power cord and no floor space. Try this before you choose: look at the floor beside your TV stand, and if there’s no free spot about a foot square, the built-in route is the practical one.
The bars with a separate wireless subwoofer, such as Hisense’s HS2100 and Philips’s TAB5306, sit just above this ceiling. RTINGS calls the HS2100 its best soundbar under $100 while noting it usually costs slightly more, and the under-$150 list linked above covers both.
Which Connection Should a Soundbar Under $100 Use?
Subwoofer or not, the bar still has to hear your TV, and at this price the port matters more than any other spec. Use HDMI ARC when both the TV and the bar have it, because one cable then carries the sound and, with HDMI-CEC on, lets the TV remote set the bar’s volume.
Three picks have HDMI ARC: the two Philips bars and the Sony. The Vizio has none, so it connects by optical or a 3.5 mm cable, and the TAB4000 has nothing but HDMI ARC, so it needs a TV with an ARC port.
Optical is the fallback for TVs without ARC, and the Sony and Vizio both ship the cable. The TAB5109 has an optical input too, though Philips limits it to Dolby Digital and 2-channel PCM.
None of the four includes an HDMI cable, so budget for one if you plan to use ARC with a Philips bar or the Sony. Vizio’s guide adds one more tip for its digital input: if there’s no sound, set the TV’s output to PCM, because some TVs don’t pass digital audio through.
eARC, the newer version of ARC, carries uncompressed 5.1 and 7.1 and formats such as Dolby Atmos and DTS:X over one HDMI cable (HDMI Licensing Administrator). None of these four lists eARC, which matters less here because none of them decodes those formats anyway.
Try this before you order: look at the TV’s back panel for an HDMI port marked ARC or eARC, then for an optical port, then for a headphone jack. How HDMI ARC and optical compare explains when each one is the better choice.
Will Your TV Remote Control a Soundbar Under $100?
That HDMI choice also settles the remote question for most of these bars. Yes on the two Philips bars with HDMI-CEC switched on, and on the Vizio after you teach it your remote’s buttons; Sony’s startup guide doesn’t say.
Philips lists HDMI-CEC, which it calls EasyLink, for both its bars, and its TAB5109 leaflet says you can adjust the soundbar’s volume with your TV remote. Both Philips bars are also Roku TV Ready, which Philips says means simple setup, one remote and quick settings with a Roku TV.
Vizio’s guide gives the SB362An-F6 a learning mode for a TV remote’s volume down, volume up and mute buttons, done by infrared since the bar has no HDMI. Vizio’s guide also says a VIZIO TV remote can power it on and set its volume, a setting that starts switched on.
Sony’s startup guide only shows the bar’s own remote for volume and input, so check Sony’s operating instructions for TV-remote control. Try this after you connect any of the HDMI picks: press volume on the TV remote, and if the bar doesn’t answer, look for HDMI-CEC in the TV’s settings menu.
How Do You Set Up a Soundbar Under $100?
Remote settings come last, though, because the makers’ guides all start with the cable. Setup takes three steps on every pick: connect the one cable your TV supports, plug in the power, then choose the matching input on the bar.
For the Sony, the startup guide asks first whether your TV has an HDMI IN jack labeled ARC. If yes, use an HDMI cable you supply; if no, use the optical cable in the box, then turn on the TV before the bar and check that the bar’s TV light is on.
For the Vizio, the guide says to choose one cable, optical or the 3.5 mm-to-RCA cable, and connect it to the TV’s matching output. If a digital connection gives no sound, Vizio’s fix is to set the TV’s audio output to PCM.
For the TAB4000, Philips’s manual shows the HDMI ARC cable going from the bar to the TV’s HDMI (ARC) port, then selecting HDMI ARC as the source on the remote. Bluetooth pairing has its own step later in the manual.
The TAB5109 follows the same HDMI ARC route, with optical and the 3.5 mm input as backups.
Try this before you start any of them: find the audio output menu in your TV’s settings. Vizio’s fix for a silent digital connection is the TV’s PCM setting, and the TAB4000 takes nothing but PCM over HDMI, so you’ll likely visit that menu once.
What Do 2.0 and 2.1 Mean on a $100 Soundbar?
Once the bar is connected, the channel numbers on the box tell you the most about how it can sound. Dolby’s counting puts the main ear-level speakers first and the subwoofers second, so a 2.0 bar has left and right channels and no subwoofer, while a 2.1 bar adds one.
Three picks are 2.0: both Philips bars and the Sony. The Vizio is 2.1, with its two subwoofer drivers built into the bar instead of a separate box, which is the setup from the subwoofer section above.
None of the four is a surround system with rear speakers, which Dolby’s 5.1 layout adds as two surrounds. Philips says DTS Virtual:X needs no extra speakers to create its virtual 3D effect.
The makers’ own ranges hint at the difference: Vizio rates the 2.1 SB362An-F6 from 50 Hz, Philips rates the TAB5109 from 60 Hz and the TAB4000 from 80 Hz. Treat that as rough, since none of the three gives a tolerance and Sony publishes no range in the documents read here.
Think of the “.1” as the part of the system that handles the rumble in films. Without it, a 2.0 bar leans on its main drivers, like Sony’s bass reflex speaker, for low end.
Can a Soundbar Under $100 Play Dolby Atmos?
Those channel numbers already point to the answer, and it’s no for all four picks by their makers’ documents. None lists Dolby Atmos decoding, and none lists the height speakers Dolby describes as either installed in the ceiling or upward-firing drivers that bounce sound off it.
What you get instead is virtual processing. The TAB5109 and the Vizio list DTS Virtual:X, which Philips calls immersive 3D sound in any room with no extra speakers, and Sony lists its own S-Force Pro front surround.
Vizio describes its Virtual:X mode as simulating the effect of overhead sound, and when it’s switched off, every source plays back in stereo. That on-off switch is worth trying with the same scene both ways.
If Atmos decoding matters, it starts above this price. The under-$150 list includes a bar that decodes Atmos and DTS:X, though even that one plays them from a 2.0 layout.
Which Soundbar Under $100 Is Best for Dialogue?
Atmos aside, clear voices are the main reason many people buy a cheap soundbar. For dialogue, the Philips TAB5109 names the most specific tools: a Dialogue Enhancement switch that works in any of its four EQ modes, plus a Voice preset and a night mode.
The TAB4000 has the same Voice preset without the separate switch or night mode. The Vizio offers DTS TruVolume for a consistent volume level, and Vizio suggests turning its bass down to the lowest setting for late-night viewing.
Sony’s startup guide names no voice or dialogue mode for the HT-S100F, and its listing names none either. That’s a gap in the documents, so check Sony’s operating instructions if voices are your main concern.
Try this once your bar arrives: put on a news channel at your usual volume, then switch the dialogue or Voice setting on and off. If voices still sink under the music in films, a night mode or TruVolume is the next setting to try.
Can a $100 Soundbar Stream Music From Your Phone?
Dialogue is half the job, and all four bars also play music from a phone over Bluetooth. Every one lists Bluetooth, and none lists Wi-Fi, so music comes from whatever a paired phone, tablet or laptop sends.
The two Philips bars list Bluetooth 5.4, and the TAB5109 adds LE Audio support, which Philips says gives a steadier connection and less lag with a compatible phone. Both Philips bars list SBC as their Bluetooth format.
Vizio’s guide gives its Bluetooth a range of up to 30 feet and notes that Bluetooth is a compressed audio format. Sony’s listing names Bluetooth music playback on the HT-S100F.
USB covers stored files: Philips lists MP3, WAV and FLAC for both its bars, and Vizio’s USB port plays WAV and MP3 only. Sony’s listing names USB music playback too, without a format list in the documents read here.
Consumer Reports says the budget bars it recommends will do a decent job playing music (Consumer Reports). Its picks are its own, not these four, so take that as a general note about the class.
Is a Soundbar Under $100 Better Than Your TV’s Speakers?
That music question leads back to the TV itself, and on paper most TV speakers leave room to improve. Consumer Reports says most of the 200-plus models in its TV ratings earn no more than a decent audio-quality score.
Each pick adds its own pair of drivers in a separate cabinet, and the Vizio adds two bass drivers. None of this guide’s bars was compared with a TV by ear, so their sound isn’t ranked here; the case rests on the makers’ specs and CR’s ratings.
RTINGS puts it in similar terms for the bars it tested in this band: budget bars skip premium features but are still a solid step up from a TV’s built-in speakers. That’s its finding from its own lab, not a claim about these four.
A bar can’t fix a missing port, though. If your TV offers only a headphone jack, the TAB5109 and the Vizio take 3.5 mm audio, while the Sony and the TAB4000 have no 3.5 mm input in their makers’ documents.
Can You Wall-Mount a Soundbar Under $100?
Once a bar beats the TV, the next question is where it goes, and all four can go on the wall. Each maker includes either brackets or a template: Philips puts wall brackets in both its boxes, Vizio includes two brackets, and Sony includes a wall-mount template.
Philips’s TAB4000 manual suggests about 50 mm, or 2 inches, between the bar and the bottom of a wall-hung TV, with two holes 640 mm apart. Vizio’s guide says its bracket screws aren’t included, so pick screws or anchors that suit your wall.
Sony’s startup guide points to the separate operating instructions for wall mounting the HT-S100F. Those instructions weren’t among the documents read for this guide, so follow Sony’s own steps.
Try this before drilling: hold the bar under the TV and check that the TV’s remote sensor stays clear. A bar sitting in front of the sensor is one of the easiest problems to avoid at this stage.
Will a Soundbar Under $100 Fit Under Your TV?
The wall mount settles height, and the next check is width and depth. Both Philips bars are about 30 inches wide (766 mm for the TAB5109 and 760 mm for the TAB4000), and Vizio’s listing gives its bar as 36 inches.
Depth matters on a TV stand, where a bar sits between the TV’s feet or in front of them. Philips gives the TAB5109 a depth of 91 mm and the TAB4000 87 mm, roughly 3.5 inches, and Sony’s startup guide gives no dimensions for the HT-S100F.
Height is the other number to watch, because a tall bar in front of a low TV can cover the bottom of the picture or the remote sensor. Philips lists 67.3 mm for the TAB5109 and 64 mm for the TAB4000, both about 2.5 inches.
Try this with a tape measure: check the gap between the stand’s top and the bottom of the screen, and the space between the TV’s feet. If the gap is under about 3 inches, a wall mount or a slightly lower bar is the safer plan.
Who Should Spend More Than $100 on a Soundbar?
Those size checks apply at any price, but a few needs really do push the budget up. Spend more if you want a separate wireless subwoofer, a streaming player built into the bar or Dolby Atmos decoding.
Each of those starts just above this line. The under-$150 list covers wireless-subwoofer bars from Hisense and Philips, Roku’s Streambar SE with 4K streaming, and an Atmos-decoding Vizio.
For a firmer ceiling of $200, the best soundbar under 200 dollars page compares the next tier. Stay at $100 or under if one of these four already matches your TV’s ports and formats, because the extra money buys features, not compatibility.
Which Soundbars Didn’t Make the List?
Those higher tiers explain several absences, since familiar bars missed the $100 line or another check on 20 October 2026. The Hisense HS2100 and A620, Roku Streambar SE, Amazon Fire TV Soundbar and Philips TAB5306 were all above $100 on Amazon that day, and Vizio’s SV200M showed as currently unavailable.
TCL’s S45H met the price, rating and stock checks, and RTINGS names it its best standalone soundbar under $100, but TCL’s own site has refused Burton’s research scripts, so its maker’s documents couldn’t be read. The same goes for Ultimea, whose bars took several of Amazon’s under-$100 spots.
Philips’s TAB4208 couldn’t be shipped to the delivery location Amazon used for the check, and its B7305 2.1 bar was rated below 4.0. Several Majority bars passed the rating check, but their listings weren’t matched to a Majority product page for this guide, so they’re left out.
Several bars appeared only as renewed units, including an onn.-branded Roku Smart Soundbar and a Roku Streambar SE, so they were left out. Little-known brands such as Saiyin, Bestisan, RIOWOIS and MZEIBO filled the rest of the results, but this guide sticks to bars whose makers publish documents that could be read.
What Should You Check Before You Buy a Soundbar Under $100?
Everything above comes down to four checks, and they take about five minutes with your TV’s back panel in view:
- The TV’s ports: HDMI ARC or eARC, optical, or only a headphone jack.
- The TV’s audio output setting: the TAB4000 takes PCM only over HDMI, and Vizio suggests PCM if its digital input stays silent.
- The cables in the box: optical with the Sony and Vizio, and no HDMI cable with any pick.
- The price on the day: a sale ending can push a pick past $100.
If all four line up, the card for that bar is the one to open. If none of the bars fits, the gap is usually a port, and that’s the moment to look one tier up.
The Bottom Line
So the Philips TAB5109 is the best soundbar under $100 for most TVs, with five ways in and the widest format list of the four. The Sony HT-S100F is the safe bet for an older TV, thanks to its optical cable in the box.
The Vizio SB362An-F6 is the only pick with built-in subwoofer drivers, as long as your TV has optical or a headphone jack. The Philips TAB4000 keeps setup to one HDMI ARC cable on a newer TV.
Whichever one fits, open its card and check today’s price and stock before you order. A bar that slips past $100 isn’t a bad buy, but it’s worth comparing with the under-$150 picks at that point.
Frequently Asked Questions
What is the best budget soundbar under $100?
For most TVs, the Philips TAB5109, because it covers the most connections: HDMI ARC, optical, a 3.5 mm input, USB and Bluetooth 5.4, with Dolby Digital Plus and DTS 5.1 over HDMI ARC. For an older TV, the Sony HT-S100F ships with an optical cable, and for more bass without a second box, the Vizio SB362An-F6 has two built-in subwoofer drivers. Check the price on the day, since sales move bars across the $100 line.
Which brand makes the best soundbar for under $100?
No single brand wins on every TV. On 20 October 2026, Philips had two bars under $100 with full spec sheets, Sony had the HT-S100F, and Vizio had the SB362An-F6. Hisense, Roku and Amazon make bars that sat just above $100 that day. Little-known brands filled most of Amazon’s under-$100 results, but their makers’ documents weren’t checked for this guide.
Is a 2.1 or 5.1 sound bar better for under $100?
At this price, the realistic choice is 2.0 or 2.1, not 5.1. By Dolby’s counting, 5.1 means five main speakers, including two surrounds, plus a subwoofer, and none of the four picks has rear speakers. The Vizio SB362An-F6 is the only 2.1 pick, with its subwoofer drivers built into the bar. If surround matters, plan to spend more than $100.
Are soundbars under $50 worth it?
Possibly, but this guide can’t vouch for any of them. Amazon’s lowest-priced soundbars on 20 October 2026 came mostly from little-known brands whose makers’ documents weren’t read here, so their ports and formats couldn’t be checked. If you buy one, confirm it has the port your TV uses, HDMI ARC, optical or a headphone jack, before anything else.
